Sliding Barn Door Hardware Kit Heavy Duty Smoothly and Silently Easy to Install Fit Single Door Panel Big Wheel Style Black

This sliding wood door hardware kit set is a great design for home, which is a popular new way to bring innovation into the home and close off bedroom and side room in a stunningly unique way.

The door is hung on a piece of hardware with a wheel.That rolls along a track mounted to the wall.

Spliced Rails:

Rail is made by solid 1.21″ (5.5 mm) thick, 1.51″ (40mm) wide carbon

steel, finished with highly durable powder coating.

Rail Spacers & Lag Bolts:

With lag bolts and the spacers, it is used to connect the rail on the wall.

Hangers:

The strap of the hanger is made by 1.21″ thick carbon steel and the

wheel is made by duty nylon, very durable and smooth. Fit door panel

thickness: 1.18″-1.96″ (30mm -50mm).

Door Stoppers:

Door stoppers slide along the rail and tighten down at any point to stop

your doors anywhere you want, and they’re cushioned by rubber caps

for a quiet close.

Floor Guide:

Mark center line of overlap and place center of floor guide in line.Slide

the door closed and secure the floor guide.

STEP 1. Make the stud locations.

Make sure that the track is level and allow for the installation height of the floor guide.

If the floor is not level, refer to the highest point to avoid affecting the movement of the sliding door.

STEP 2. Attach head board on the wall (if needed).

STEP 3. Install the metal track on the wall.

Spliced track, assembly needs to be completed in advance.

STEP 4. Mount the stoppers on the track.

STEP 5. Install the rollers on the door.

STEP 6. Mount the anti-jump disks.

STEP 7. Mount the door guides.

STEP 8. Lift and place the door on the track.